Soil nailing is used to strengthen slopes, embankments and old walls without major excavation or heavy plant.
Soil nailing is a way of holding unstable ground in place. Steel bars, called soil nails, are installed into a slope or wall and fixed with cement grout. A facing of mesh, geogrid or plates is then fixed to the face, so the nails and the ground work together as one stronger mass. It is widely used in the UK to repair slopes that have slipped, to cut back slopes for new building, and to save old walls that are starting to fail.
Where is soil nailing used?
Soil nailing suits a wide range of sites, including failed or unstable embankments and landslips; cuttings and cut-back slopes that make space for housing or industrial units; old stone, brick or masonry retaining walls that are leaning, cracking or have partly collapsed; roadside, towpath, railway and boundary slopes; and new build sites where an exposed slope must be made safe before other work can go ahead.
How soil nailing works
First the ground is assessed and the nail layout is designed. Holes are then drilled into the slope on a set grid, the steel nails are placed in the holes and grouted in, and a facing is fixed to the nail heads. On cut-back slopes the work is done in stages, top down, closely following the excavation. The finish can be rock mesh, a flexible geogrid, gabion baskets or soil-filled baskets that let plants grow, depending on how the site needs to look. Soil nailing can use compact drilling equipment, so it often works where larger machines cannot reach.
Our soil nailing work
C & J Geotechnical Services design and install soil nails for private clients, builders and developers. Our excavator-mounted and mini drill masts can work on steep or awkward ground. Where a wall is already fragile, we can diamond core through it first to avoid vibration. Where people walk past, we use our bespoke pedestrian plates, which are bearing plates with no protrusions, so there is nothing to catch on.
See some of our projects:
- Ramsbottom: 400 soil nails and rock mesh to a slope on a new build housing site
- The Hermitage, Corsham: stabilising an old masonry wall that had partly collapsed
- Plymouth: self-drilling soil nails to a garden wall beside a busy road
- Lancashire: soil nails with mini gabions to a failed brick retaining wall
- Ashton Under Lyne: soil nails and rock mesh to widen a towpath
Soil nailing questions
What is the difference between soil nails and ground anchors?
Soil nails are passive: they work as the ground moves slightly and share the load through the soil. Ground anchors are tensioned and locked off to hold a set load straight away, which suits some walls and deep excavations. We can advise which suits your site.
Do I need soil nails or a new retaining wall?
Soil nailing is often quicker and needs less excavation than rebuilding a wall, but it depends on the ground and what is behind the wall. A short site visit and the ground information usually tell us which is better.
Will soil nailing damage an old wall?
Not if it is planned properly. On fragile walls we core the holes rather than hammer them, which keeps vibration to a minimum.
How long does it take?
Small jobs, such as a garden or boundary wall, are often quick. Larger slopes take longer. We give you a programme with your quote.
For information, soil nailing works in the UK are covered by BS EN 14490, with design guidance in BS 8006-2.
